Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
88
GAS INSTRUCTIONS
ƽ WARNING: Do not ignite burners when leak
checking.
Check for leaks by wetting the connections with the soap
and water solution and watching for bubbles. If bubbles
form or if a bubble grows, there is a leak.
Check:
1) Gas line-to-manifold connections.
ƽ WARNING: If there is a leak at connection (1),
retighten the fi tting with a wrench and recheck for
leaks with soap and water solution.
If a leak persists after re-tightening the fi tting, turn
OFF the gas. DO NOT OPERATE THE GRILL.
Contact
the Customer Service Representative in your region
using the contact information sheet provided with
your manual.
2) Regulator to cylinder connection.
3) Hose to regulator connection.
4) Valves to manifold connections.
ƽ WARNING: If there is a leak at connections (2, 3, or
4), turn OFF the gas. DO NOT OPERATE THE GRILL.
Contact the Customer Service Representative in your
region using the contact information sheet provided
with your manual.
When leak checks are complete, turn gas supply OFF at
the source and rinse connections with water.
(1)
(4)
(3)
(2)
Reinstall control panel
Parts required: control panel, screws, and burner control
knobs.
Place the control panel back onto the control panel
brackets on either side of the front of the cooking box.
Line up screws with screw holes on both the control panel
and control panel brackets. Tighten screws.
Reinstall burner control knobs & igniter wires (if
necessary).
(1)
(2)
Place corresponding control knobs down onto the valve
stems. From the underside of the control panel, replace
the two wires (1, 2) of each igniter.
-
+
-
+
2
1
1 = White Tab with Black Wire
2 = Yellow Tab with Black Wire