Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
THIS GAS APPLIANCE IS DESIGNED
FOR OUTDOOR USE ONLY.
42370 US 10/01/05
NG
LOCATING YOUR GRILL
When determining a suitable location for your Summit
®
gas grill installation, give attention to concerns such as exposure to wind, proximity to traffi c paths, and
keeping any gas supply lines as short as possible. Never locate the Summit
®
gas grill in a garage, breezeway, shed, under an unprotected overhang, or other
enclosed area. Locate the grill and structure so there is enough room to safely evacuate the area in case of a fi re.
CLEARANCE FROM SURFACES OR STRUCTURES
ƽWARNING: Clearance from any surface or structure is
24 inches (609.6 mm) from the back and sides of the grill.
Refer to “Typical Gas Supply Installation” before starting
installation.
ƽWARNING: The structure, “island”, countertops, and
adjacent work areas for the built-in grill installation must be
built from noncombustible materials only.
NOTE: If you have questions on what materials are considered noncombustible,
contact your local building materials supplier or fi re department.
A
ny
S
ur
f
ace
Any Surface
24 inches (61 cm) Any Surface
24 inches
(61 cm)
24 inches
(61 cm)
Grill Frame
Note: For a countertop treatment: Recommended 3/4 inch
(
19.1 cm) overhang. Notch front edge for frame to fully
slide in.
27 inches (685.8 mm) min. for
lid clearance
1
3
2
BUILT-IN NG GAS GRILL INSTALLATION GUIDE
PLATINUM D4 / D6
SUMMIT
®
BUILT-IN STRUCTURE CUTOUT DIMENSIONS
ALL DIMENSIONS ARE TO FINISHED SURFACES.
ƽ WARNING: All countertop fi nished surfaces must be
constructed of a noncombustible material.
Built-In Cutout Dimensions
D4 D6 Tolerances
1
30
1
/
4
˝ 38
1
/
4
˝+
1
/
4
” -
1
/
4
˝
2
34
1
/
4
˝ 34
1
/
4
˝+
1
/
4
” -
1
/
4
˝
3
21˝ 21˝ +
1
/
4
” -
1
/
4
˝
42370
42370_NG BIinstll.indd 1 9/23/05 11:08:10 AM