Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
8
INSTALL WORK
SURFACES
FOR THE PLATINUM SERIES II 2200
You will need...left work surface, right work surface, four
1/4-20 x 1/2 inch bolts, four nylon washers and a 7/16
inch or adjustable wrench.
Insert the left work surface tabs in the slots to the left of
the cooking box. Figure 11 (a). Slip washers on the bolts
and insert the bolts as shown. Tighten. Figure 11 (b).
Insert the right work surface tabs in the slots to the right of
the cooking box. Figure 11 (c). Slip washers on the bolts
and insert the bolts as shown. Tighten. Figure 11 (d).
Platinum Series II 2200
Figure 11
(a)
(b)
(c)
(d)
View from
left side
View from left
underside
View from
right side
View from right
underside
Tabs
Tabs
Tabs
If you have the Platinum Series II 2200,
continue to step “Install Work
Surfaces” on this page.
If you have the Platinum Series II 3200,
go to step “Install Work Surface and
Side Burner” on page 9.
If you have the Platinum Series II 3400,
go to step “Install Work Surface and
Side Burner” on page 11.
After this assembly, proceed to step “Install Bottom
Rack” on page 13.