Weber 3200 Gas Grill User Manual


 
33
g) Lift and twist the burner assembly slightly, to separate
the crossover tube from the burners. Figure 19.
Remove the burners from the cooking box.
Crossover tube
Figure 19
Figure 16
View from behind
cooking box
Wing nuts
Figure 17
Guide screw
Figure 18
h) To reinstall burners, reverse steps c) through g).
ƽ CAUTION: The burner openings must be positioned
properly over the valve orifices. Figure 20a.
Check proper assembly before fastening manifold in
place. Figure 20b.
(a)
Valve
Burner
Figure 20
(b)
e) Remove the manifold bracket and unscrew the two
thumb screws that hold the manifold to the cooking
box. Pull the manifold and valve assembly out of the
burners and carefully set it down. Figure 17.
f) Slide the burner assembly out from under the guide
screw and washer in the corners of the cooking box.
Figure 18.
d) Unlatch the Spider Stopper Guards and remove.
Figure 16.