Viking VGIQ410E Gas Grill User Manual


 
LP/PROPANE FIXED PIPING CONNECTION
Connection:
Operating Pressure:
Supply Pressure:
Standard Residential 1/2" ID gas service line - 1/2" NPT male with 3/8" flare adapter.
10.0" W.C.R LP/Propane.
11" to 14" W.C.R Nat. If in excess of 14" W.C.R, a step-clown regulator is required.
Check with your local gas utility company or with local codes for instructions on installing gas supply lines. Be sure to check on
type and size of run and how deep to bury the lines. If the gas line is too small, the grill will not function properly.
To connect the supplied regulator assembly to the incoming flexible gas line, attach with a 3/8" female flare adapter to the
3/8" male flare adapter to the regulator assembly. Ensure that the regulator arrow points in the direction of the gas flow
towards the unit and away from the supply. Attach the regulator assembly to the grill unit with the 3/8" female flare adapter on
the regulator assembly to the 3/8" male flare adapter on the grill.
DO NOT forget to place the installer supplied gas valve in an accessible location.
_ 3/8" female
flare adapter
f -
Regulator
j-
3/8" male
flare adapter
Regulator Assembly
@'@@@ 0
3/8" Male
flare
adapter 1]_ installer supplied
shut-oF valve must
be easily accessible
_ flexi_
Installer supplied
gas line with 3/8"
female flare adapter or
Viking GHS12