Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
OUTDOOR—COOKING
53”W. Ultra-Premium T-Series/E-Series Gas Grill
PLANNING AND DESIGN GUIDE
VIKINGRA NGE.COM • 1-88 8-VIKI NG1
All models include
• Brass Trim Option (BR)—nameplate,
handle/brackets, and knob bezels.
Brass components have a durable
protective coating for maintenance-
free normal use.
FINISH DETAILS FOR ALL MODELS
• Stainless Steel (SS)
o Porcelain-coated cooking grids (and
“V” grates on the 412 model’s side
burners), and black knobs.
Standard Features & Accessories
Model Options
*T-Series & E-Series models look the same, with the exception of the canopy light switch in the upper right corner of the E-Series control panel.
(See photo of 30”W. E-Series grill for example.)
ORDERING INSTRUCTIONS
You must specify fuel type (“N” or “L”) following model number (VGBQ5304RT1NSS). If ordering optional brass trim, specify code at end
(VGBQ5304RT1NSSBR).
RELEASED 8/5/08
©2008 VRC—INFORMATION SUBJECT TO CHANGE
VGBQ530-4RE1*
T-Series/E-Series
Four-Burner All-Grill
VGBQ532-3RE1*
T-Series/E-Series
Three-Burner Grill
w/Side Burners
VGIQ530-4RT/E1*
T-Series/E-Series
Four-Burner All-Grill
(inc. TruSear™ Burner)
VGIQ532-3RT/E1*
T-Series/E-Series
Three-Burner Grill
w/Side Burners
(inc. TruSear™ Burner)
• Commercial styling and construction
o
Built from thick sheets of rugged,
heavy-duty stainless steel
o
Double wall construction insulates
hood to help keep heat inside and
provides for a cooler sidewall
o
Hood is slightly slanted to prevent
water from accumulating on top of
grill, and provides a sleek style that is
synonymous with the Viking name
o
No exposed rotisserie slot to take
away from strength of sidewall or
allow heat to escape
o
All models can be built into any type
of enclosure without the need of an
insulated jacket – a Viking exclusive
o
Stainless steel landing ledge with
solid, welded, seamless finish
o
No assembly required
• Canopy has been designed for seamless
fit and finish
• Knobs are cast metal for durability and
all bezels match indoor range line
• All outdoor control panel graphics are
permanently laser-etched at the factory
• Extra-deep sealed burner box keeps
heat contained in burner area, allowing
easier temperature maintenance
• Stainless steel flavor-generator plates
catch drippings, generate smoke,
minimize flare-ups, and allow for better
heat control
o
Perforated design allows heat to
spread quickly and evenly across
entire surface
o
Burner flames are visible through
perforations, allowing user to visually
monitor heat output and adjust to
desired level
• Chrome-plated warming rack –
reinforced by heavy-duty rack supports –
can easily be adjusted to three different
positions, allowing use of additional
accessory racks
• Rotisseries standard on all Ultra-
Premium models; rotisserie system
consists of a 15,000 BTU Gourmet-
Glo™ infrared rear burner, heavy-duty
rotisserie motor, stainless steel 1/2”
rotisserie rods, and two rotisserie forks
o Infrared burner is a reliable,
electronically ignited one-piece
design
o Rotisserie rod is mounted on a ball-
bearing rod support that provides
smooth rotating action; rod is fully
enclosed within grill, a Viking
exclusive feature
o Rotisserie motor assembly is
supported by a rigid mount and is
easily attached and removed from
the grill for hassle-free cooking and
storage
o No counter balance required due to
heavy-duty rotisserie system
• Removable smoker box
accommodates wood chips or large
wood chunks
o
Hinged design allows easy operation
when adding smoker chips
o
12,500 BTU burner underneath can
be adjusted for maximum smoking
performance
o
Smoker box can be replaced with
grilling grate for use of entire grill
surface
• Numerical thermometer gives precise
temperatures for grilling, smoking, and
warming
• Easy maintenance and cleanup
o
Extra heavy-duty cooking grids are
porcelain-coated topreventfood from
easily sticking; virtual non-stick surface
creates optimal cooking areas, while
also creating an easy-to-clean surface
o
Burners are equipped with stainless
steel drip guards to combat burner
clog and aid grease management by
channeling liquids to the drip tray,
assisting in flare-up control
o Grease Control™ system consists of
full-width removable stainless steel
drip tray, and individual removable
trays within main tray
• Exclusive “trays within a tray”
design channels liquids to the
precise drip tray location,
providing easy cleanup because
liquids are contained
• Stainless steel ball-bearing rollers
provide smooth opening of drip
tray, while roller stops prevent tray
from falling out