Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Remove the following parts from the carton:
Two CYLINDER PINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(78)
One CYLINDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(79)
Set CYLINDER (79) on the Grill Frame and secure with the CYLINDER PINS
(78). See detail P1.
Remove plastic protective cap from TYPE 1 nipple! Insert the nipple of the
regulator (27) into the cylinder’s fuel valve inlet. See detail P2. Turn the
regulator hand wheel clockwise to tighten. No tools are needed. The Hand
Wheel will come to a complete stop when the connection is secure and gas
will not flow until a positive seal is achieved.
WARNING: During assembly of grill and when attaching or
replacing the L.P. gas cylinder, insure that the gas supply hose is free
of kinks and/or damage and is at least 3” away from hot surfaces such
as the grill casting.
P
79
78
78
78
78
79
BACK
79
27
78
R2
P1
P
(Pg. 13) 1141-1986A
*Cylinder Not Included
On
ENGINEERING CODE
SD113242
Gas Cylinder Valve
IMPORTANT! TO ENSURE PROPER GAS FLOW,
BURNER CONTROL VALVES MUST
BE "OFF"
BEFORE
OPENING THE GAS CYLINDER VALVE.