Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Care and Cleaning.
Do not leave plastic utensils in contact with
hotplate while cooking.
Before cleaning turn the power OFF, then
REMOVE the plug from the outlet and the
control probe from the socket of the BBQ Grill.
DuPont Teflon
®
Platinum
Non-stick Coating
Your BBQ Grill features a special scratch and
abrasive-resistant non-stick coating that makes it
safe to use metal utensils when cooking.
Regardless of this fact Sunbeam recommends
that care is taken with the non-stick coating
particularly when using metal utensils.
Do not use sharp objects or cut food on top of
the BBQ Grill. Sunbeam will not be liable for
damage to the non-stick coating where metal
utensils have been misused.
When cleaning the non-stick coating do not use
metal (or other abrasive) scourers. After
cleaning, dry the BBQ Grill and lid thoroughly
with a soft cloth before storing.
Always turn the power OFF and REMOVE the
plug from the power point before cleaning.
Remove the Control Probe from the socket of
the BBQ Grill.
Control Probe.
If cleaning is necessary, wipe over with a damp
cloth.
Do not immerse the control probe in water or
any other liquid.
NEVER use the BBQ Grill control probe in any
other Sunbeam appliance.
Storage
Store the probe carefully in a safe place.
Sunbeam suggest storing the control probe in its
original foam packaging to prevent damage. Do
not knock or drop it as this can damage the
probe. If damage is suspected, return the control
probe to your nearest Sunbeam Service Centre
for inspection. Refer to the back of this book for
Service Centre listings.
Hotplate, Drip Tray and Splatter
Shield.
The element in the hotplate is totally sealed, so
it is safe to fully immerse in water. Wash the
hotplate, drip tray and splatter shield in warm
soapy water using a mild household detergent
and a soft washing sponge.
A bottle brush may be used to clean between
the hotplate grill bars.
The hotplate, drip tray and splatter shield are
also dishwasher safe.
Do not use abrasives or metal scourers as they
will scratch the non-stick cooking surface. Dry
each part of the BBQ Grill thoroughly before
storing.
Moulded Base.
The base can be wiped over with a damp cloth
or washed in warm soapy water using a mild
household detergent and a soft washing
sponge.
Do not place the moulded base in a dishwasher.
Do not use abrasives or metal scourers as they
may scratch the base.
Storage.
Always dry and assemble the BBQ Grill before
storing. Ensure the drip tray and hotplate are
correctly positioned.
Store the assembled BBQ Grill on a flat surface
on your benchtop or cupboard.
Important:
Before inserting control probe in probe socket,
ensure the interior of the socket is fully dry. To
do this, wipe interior of socket with a dry cloth
or shake out excess water vigorously.
Sunbeam is a registered trademark. Platinum with
ScratchGuard is a trademark of DuPont. Made in China.
Due to minor changes in design or otherwise, the product
may differ from the one shown in this leaflet. Approved
by the appropriate Electrical Regulatory Authorities.
Backed by Sunbeam‘s 12 Month Replacement Guarantee
and National Service Network.
© Copyright. SUNBEAM CORPORATION LIMITED 2001.
(INCORPORATED IN N.S.W.) A.C.N. 000 006 771
For more information or advice on any Sunbeam products,
contact the Sunbeam Consumer Service Line on 1800 025 059
in Australia. In New Zealand - contact the Sunbeam Office in
Auckland on 09 912 0747.
8