Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Raising and lowering the
browning unit
^
To raise the browning unit, turn the
left-hand control to Extend ("-").
The browning unit will automatically
extend to its full height, even when you
release the control knob back to "ß".
You can stop the unit at any height by
briefly turning the control knob to "e".
^
Turn the left control knob to Retract
("e"), and hold it until the desired
height is reached or the browning
unit is fully retracted.
The browning unit can be fully
retracted only once the residual heat
indicator goes out.
Switching on and off
Do not leave the appliance
unattended while in use.
The appliance is switched on when the
right control knob is turned to the
desired setting, and is switched off
when the knob is turned to "0".
The knob can be turned clockwise or
counter-clockwise to switch the
appliance On and Off.
The ON light comes on when the
appliance is in operation.
As soon as a certain temperature is
reached, the residual heat indicator
comes on as well. The indicator will not
go out until the ceramic glass plate of
the browning unit is safe to touch.
The appliance will not heat up
unless the browning unit is raised to
at least 2
3
/
4
" (70 mm).
Operation
10