Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
3
3
Insert leg holder (16) on the short legs (18) and long legs (17),
and attach them to the bottom of the fire bowl (10), one by
one, using the screws and washers already attached to each leg.
Tighten with fingers only until all legs have been assembled.
Note: One handle should be located between the two long
legs and the other handle should be located between the two
short legs.
4
Insert the wire shelf (20) into leg ends. The bent tip goes
into the holes on the long legs first. Then, align and insert
the other ends into the two short legs (make sure that hole
closest to the end of the leg faces outward).
5
Insert spacer (23), wheel (21), and washer (24) and secure
with cap nut (22) on both sides.