Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Part 3: Operating Instructions
Log Installation
Warning: As with all plastic bags, these bags are not toys and should
always be kept away from children and infants.
1. Remove logs from packaging.
2. Place left rear log on rear
support. Ensure that log is firmly
positioned and there is no side
to side movement. (Refer to
Figure 11)
3. Carefully place ember log
between grate and burner.
4. Place the front of right rear log
on the burner and the back of
the log on the rear log support.
5. Place the top logs onto the
locator notches. Ensure the logs
are secure.
Figure 11
First Firing
Upon completion of the gas fitting line, a small amount of air will be trapped in the
gas pipe. When first lighting the pilot light, it will take a few minutes to purge the
trapped air.
Once purging is complete, the pilot and burner will light and will operate as outlined
in the instruction manual. Subsequent lighting of the appliance will not require
purging.
When lit for the first time, the appliance will emit a slight odour for an hour or two.
This is due to the paint and lubricants used in the manufacturing process.
Page 11 of 18