Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
10
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Co-axial DV Vent
4-1/2" (114) Inner
7-1/2" (191) Outer
36-23/32
(933)
21-1/16 (535)
1-7/8
(48)
6-1/16
(154)
8-7/32
(209)
1-1/2
(38)
15-1/32
(382)
15-15/32
(393)
7-11/16
(195)
34
(864)
40-1/32
(1017)
20-3/4
(527)
14-3/4 (375)
5-13/32
(137)
Framing Dimensions - All Models
Inches (millimeters)
A B C D
in. 22-1/8 40-1/4 15-3/4 44-1/8
mm 562 1022 400 1121
Framing With Platform
The platform should extend the full width
and depth of the fireplace base.
* D shown here is not dimensioned to the vertical center of
the horizontal framing. This is to allow for the required 4"
clearance above the vent and the 1" required clearance
below the vent. This does not include the suggested 1/4"
rise per foot for horizontal runs.
** With the facade installed (required - sold separately), the
appliance base will need to be elevated a minimum of 3/4"
above the floor to allow for the proper fit of the facade (i.e.
use 3/4" board minimum as platform).
D
B
10¹⁄₂
(267)
VENT FRAMING -
TOP VENT WITH ONE
90° ELBOW
Framing should be
constructed of 2x4
or larger lumber
A
C
Platform
Figure 12
FIREPLACE AND FRAMING SPECIFICATIONS
Efficiencies %
Adagio BTU/hr Steady
State
EnerGuide
P4
Natural Gas 10,000-13,000 71.82% 58.3%
Propane Gas 10,000-13,000 73.27% 59.4%
Notes
Diagrams, illustrations and photo-
graphs are not to scale – consult
installation instructions. Product
designs, materials, dimensions,
specifications, colors and prices are
subject to change or discontinuance
without notice.