KitchenAid KFRU488VSS Charcoal Grill User Manual


 
10
Attach Side Shelf (on some models)
1. Open doors below grill and remove carton. Unpack side
shelf.
2. Locate 4 screws. Install 2 screws in the top 2 holes on each
side of the grill. Leave screws away from side of grill about
¼" (0.64 cm).
3. Install side shelf on left side of the grill. Position the side shelf
so that the large end of the keyhole slots are over the screws.
Place shelf onto the 2 mounting screws. Let the shelf slide
down so the screws are in the narrow neck of the slots.
4. Install the bottom 2 screws and tighten.
5. Tighten the top 2 screws.
Attach Cabinet Doors (on some models)
1. Remove foam wrapping from both cabinet doors.
2. Position hinge pins on the door with the hinge brackets on
the cabinet. Gently push down to slide the pins into place.
Attach Condiment Shelf (on some models)
1. Open cabinet door.
2. Use a short Phillips screwdriver or a 90° screwdriver with a
Phillips screw bit to loosen the 2 mounting screws on the
inner door panel.
3. Position the condiment shelf so that the large ends of the
keyhole slots are over the 2 mounting screws.
4. Lower the condiment shelf until the 2 mounting screws are in
the narrow ends of the keyhole slots.
5. Tighten the screws.
6. Dispose of/recycle all packaging material.
A. Top of side shelf
B. Keyhole slot
C. Front of side shelf
D. Side of grill
A. Door hinge pin
B. Hinge bracket
A
B
C
D
A
B
A. Mounting screws
A. Mounting screw in keyhole slot
B. Condiment shelf
A
B
A