Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
2
1
Attach side panels to bottom shelf using three
1/4-20x1/2” screws, 7mm lock washers and
IMPORTANT: Panel with large hole must
be on right side of bottom shelf.
Locking caster
Bottom shelf
Non-locking caster
Rear
Front
Left side panel
(with large hole)
Make sure side panels
are pushed as far to the
rear of bottom shelf as
possible before fully
tightening screws.
Right side panel
ASSEMBLY
1/4-20x1/2” screw
1/4-20x1/2” screw
Qty.6
Qty.6
7mm lock washer
7mm lock washer
7mm flat washer
464224011 • 15
Qty.6
7mm flat washer
7mm flat washers per panel.
Qty.1
Bent U pin
Bent U pin
A
Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place,
shown A. Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U
Pin and repeat for remaining casters. Make sure the two locking casters are secured at the rear and the
non-locking casters are secured at the front. After all 4 casters are secure remove the Bent U Pin and
save for future maintenance.