Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Burner and Firebox and Control Knobs
Placeburner assembly into firebox. Fasten the burner assembly to the firebox using 5x15 fiber washers and #10-24xl/2"
machine screws (A).
i Inside firebox, insert heat diffuser supports with 5x15 fiber washers to firebox through sides of firebox, then secure with
#10-24 flange nuts on outside of firebox (A).
Place firebox on cart. Make sure burner tubes are correctly engaged with valves. If burner is not level from left to right,
adjust the two screws attaching valve to control panel.Attach ignitor wire to ignitor( B ).
ii Attach firebox with #10-24x2" machine screws, 5x15 fiber washers and #10-24 flange nuts ( C ).
Push control knobs onto valve stems ( C ).
A
Burner assembly
Firebox
j"
#10-24 5xl 5
Flange Nut FiberWasher
Qty.8 Qty.10
@
\
\
Heat diffuser
support
Heat shield
for Tank
#10-24Xl/2" Heat diffuser Support
Machine Screw Qty.4
Qty.6
Valve...........
Control Knob
Makesure the burner tubes are located
underneath Heat Shield
C
18,464722309 °464722509