Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Installing Side Burner and Side Shelf
1. Remove and discard the protective rubber boots
from the Side Shelf and Side Burner braces.
2. Enlisting the aid of an assistant, attach Side
Burner to tank side of grill. Remove the fasten-
ing strip from burner. Attach Side Shelf to side
opposite tank as shown in Fig. 9. Align the 4
holes on Side Shelf and Side Burner frame with
the Cart Legs. Tighten securely using 4 of the
1/4"x3/4" Phillips head screws provided.
3. Place a Storage Bin into left Side Shelf.
4. The Brass Adaptor of the Gas Valve Assembly
(located directly behind the Side Burner control
knob) has 2 threaded fittings. Connect the
Connection Tube from Grill Head to the horizon-
tal fitting. Connect hose end of LP gas regula-
tor to vertical fitting. Tighten both connections
securely with adjustable wrench. See Fig. 9a.
5. For Naturam Gas grills: Connect the hose
end of the 12' Natural Gas Hose to the
vertical fitting as shown in Fig. 9b. Also read
the natural gas safety instructions on the next
page.
6. On both LP gas and natural gas grills, con-
nect the Ignition Wire terminal from Side
Burner with the other from Grill Head. See
Fig. 9. Bind the connected Ignition Wires and
Connection Tube together using the supplied
Fastening Band.
7. Install and slide the 5 Tool Hooks onto the
Tool Holder from the narrow section. For
safety's sake, the Tool Hooks face in the
same direction as both ends of Tool Holder.
See Fig. 9c.
8. Attach the Tool Holder to the left Side Shelf.
Align the holes on Tool Holder with the holes
on the left side of Side Shelf. Secure firmly
using 2 of the M6 Phillips head screws and
M6 nuts packed with the Tool Holder.
9. Slide the 2 screw covers onto both ends of
Tool Holder. See Fig. 9c.
Figure 9c
Figure 9
STORAGE BIN
SIDE SHELF
CART LEGS
CONNECTION
TUBE
IGNITION WIRE
FROM SIDE BURNER
FROM GRILL HEAD
FASTENING
BAND
NOTCHED HOLE
FOR THE DIAL OF
FUEL GAUGE
SIDE BURNER
BRASSADAPT?, /
GASVALVE ._"
REGULATOR WITH HOSE
LPG MODEL ONLY
Figure 9a (LP gas modem only)
GAS VALVE FOR
SIDE BURNER
BRASS
ADAPTOR
CONNECTION
TUBEFROM
GRILL HEAD
REGULATOR
WITH HOSE
Figure 9b (Natural gas model only)
GAS VALVE FOR
BURNER
BRASS
SCREW COVER
12'NATURAL
GAS HOSE
J
TOOL HOLDER
TOOL HOOK
FACING INWARDS _
NARROW SECTION
CONNECTION
TUBE FROM
GRILL HEAD
12