Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Install Side Burner Valve
[] Detach side burner ignition wire from the regulator hose. Feed side burner valve and igniter
wire through hole in left side of cabinet.
[] Open side burner lid and cut tie wrap securing grate to pan. On underside of pan, remove the 2
screws holding the side burner in place. See Inset 1.
[] Secure the side burner valve stem to the Side Burner Lower Control Panel using 2 Phillips Head
Bolts (M4x8mm). See Inset 2.
[] Center the side burner valve into the side burner tube. See Inset 3. Reattach side burner to pan
with 2 previously removed screws.
[] Use 1 Phillips Head Bolt (M4x8mm) to attach the Side Burner Lower Control Panel to the firebox.
See Inset 4.
Inset 2
Inset 1
Phillips Head Bolt M4x8mm
qty: 3
Inset 4
Inset 3
Attach Side Burner Control Knob and Side Burner Ignition Wire
[] Attach the side burner ignition wire over the side burner connector pin.
[] Push the Control Knob onto the valve stem.
ld