Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Install the Heat Diffuser, Cooking Grates, Warming Rack
[] Place the Heat Diffuser into the firebox between the ridges in the front and back panels. See Inset
1.
[] Place the Cooking Grates into the firebox. The grate bottoms have a small knob on each corner.
See Inset 2.
[] Insert the Warming Rack into the holes of firebox side panels as shown, See Inset 3.
Inset i
Inset 3
Inset 2
I_ Place and Secure LP Cylinder into the Cabinet
[] Hook the ends of the Cylinder Support Ring into the two holes in the left front and rear legs,
See Inset 1,
[] Place the LP cylinder down into the tank support hole in the bottom of the cabinet. Ensure the valve
faces to the front. Wrap the Cylinder Support Ring around the top of the tank and hook to secure the
LP cylinder in place, See Inset 2.
[] Unscrew the bolt and nut located on the front of the left side cabinet panel. Attach the regulator
hose support ring, located on the regulator hose, to the left side cabinet panel using the same bolt
and nut, See Inset 3,
Do Not Hook Up the LP Cylinder to the Regulator Assembly at this time.
Inset 1
Inset 2
]7
Inset 3