Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Install Towel Bar Handles, Utensil Hooks, Side Panels
[] Use 2 Phillips Head Bolts (M4X8mm), 2 Lock Washers (M4), and 2 Washers (M4) to attach a Towel
Bar to the side burner frame. Use 3 Phillips Head Bolts (M4X8mm) and 3 Lock Washers
(M4) to attach the Side Burner Control Panel to the side burner frame. See Insets 1 and
2.
[] Slide 3 Utensil Hooks into the second Towel Bar and use 2 Phillips Head Bolts (M4X8mm), and 2
Lock Washers (M4), and 2 Washers (M4) to attach the Towel Bar to the side shelf. Use 3 Phillips
Head Bolts (M4x8mm) and 3 Lock Washers (M4) to attach the Side Shelf Front Panel to the side
shelf frame. See Insets 3, 4 and 5.
Phillips Head Bolt M4x8mm
Qty: 10
Lock Washer: M4
Qty: 10
"S"- Hook
Qty: 3
Washer M4
qty: 4 Inset i Inset 5 Inset 4
Inset2 Inset 3
ll_ Install Side Burner Frame to Firebox
[] Unscrew the 2 Phillips Head bolts ¼" from the upper left and right corner holes in the left side of the
firebox as shown in Inset i. The bolts extending out of the firebox sides are to attach the side
burner frame.
[] Slide the upper holes of the side burner frame over the heads of the 2 Phillips Head Bolts and drop
down.
[] Use 2 Phillips Head Bolts (M6xl6mm) and 2 Washers (M6) to attach the lower holes in the side
burner frame to the firebox as shown in Inset 2. Tighten the upper bolts after the 2 lower bolts are
tight.
Inset 1
Phillips Head Bolt M6xl6mm
Qty: 2
©
Lock Washer M6
Qty: 2
Inset 2