Interlink electronic L485RB Gas Grill User Manual


  Open as PDF
of 48
 
26
www.ultrachefgrills.com
13. Side Burner Installaon
Insert (4) ¼-20 x 5/8” screws through the washers into the threaded holes in the side of the base; do not ghten all
the way. Slide the assembled side burner over the screw heads and nish ghtening. Fit the orice into the burner
tube and secure with the hose retainer clip supplied. Aach the wire from the manifold to the side burner electrode.
4 x N570-0082 (1/4-20 X 5/8”)
3/8”(10mm)
4 x N735-0001 (insulated washer)
Fit orice into burner
tube and secure with hose
retainer clip supplied.
1 x N160-0016 (clip)
485RSB MODEL
14. Cabinet Door Installaon
Install door handle onto front of door using (2) #14 x 1/2” screws per door.
Insert pivot rod through hole on inside top of door. Holding door in one hand, direct pivot rod into hole in underside of
front cabinet support. Once secure, let rod slide down and through hole in boom of door and into bushing in boom shelf.
WARNING! Do not over ghten screws, as this will cause the handle to crack.
 previous next