Hamilton Beach OG01 Gas Grill User Manual


 
13
ASSEMBLY
ASSEMBLY STEPS
STEP 3: Cart Frame
1. To attach cart frame, align cart frame with side panels as shown in Fig. 3.
2. Attach cart frame to left panel and right panel with six (6) M4 x 10 screws (3 on each side) as
shown in Fig. 3.
3. Attach cart frame to bottom shelf with two (2) M6 x 13 screws (1 on each side) as shown in
Fig. 3.
4. Position the ends of the tank baffle so that the holes in the ends of the baffle are aligned with
the holes in the side panels, then attach the tank baffle to the left and right panel with four (4)
M4 x 10 screws (2 on each side) from the outside to the inside, and four (4) M4 nuts on the
inside (2 on each side), all as shown in Fig. 3.
Fig. 3