Garland XG36-JIB Gas Grill User Manual


  Open as PDF
of 88
 
Part # JIBSM08 Rev 7 (08/04/09)Page 40
TECHNICAL TROUBLESHOOTING continued
Controller Displays “HEATING ERROR or PROBE ERROR
PLATEN and GRILL LED’s are RED (Both Sides)
YES
YES
NO
YES
NO
NO
Check for 3-phase voltage at
primary side of main contactors
Check to ensure that 3-phase
power cords are securely fastened
and plugged into their receptacles
Fasten & plug in
3-phase power cords
Check for 3-phase voltage
at secondary side of contactor
Ensure that main 3-phase
circuit breakers are
not tripped or turned o
See Technical Troubleshooting
“Controller display is BLANK,
Main Power (ON/OFF) Light IS LIT”
Check for disconnected
molex plugs going to heating elements
Inconsistent Or Erratic Internal Product Temperature
Zero Platen on eected zone
see PLATEN ZEROING Section
NO
NO
YES
YE S
YES
Grill temperature probes
are out of calibration
Carbon build up on grill surface
or behind Teon release sheets
on upper platen
Upper platen is not zeroed properly
Re-calibrate grill temperature
probes per calibration procedure
See CALIBRATION Section
Clean grill surface and / or
clean upper platen of
carbon build up
 previous next