Dyna-Glo DGP350NP Gas Grill User Manual


 

OPERATION INSTRUCTIONS
24 25
Lighting The Grill

Remove all hangings or plastic straps, if present.
Before you cook on your new gas grill, it is important to clean your grill with heat.
To do this, operate the grill for approximately 15 minutes with the lid closed and the
control knob in the highest position. This will clean the internal parts by burning off any
residue and odor from the manufacturing process.



: Do not lean over grill when lighting.
Read instructions before lighting.
1. Check that the control knobs are in the off position.
2. Open valve at tank fully by turning counterclockwise.
3. Open lid during lighting.
4. Depress and turn control knob counterclockwise from off position,
past the ignite position, to the high position. You may need to
repeat several times to ignite the burner.
If ignition does not occur in 5 seconds, turn the control(s) off,
wait 5 minutes, and repeat the lighting procedure.
If the burner still does not light, check that there is gas in the cylinder
and follow the match lighting instructions.