Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
FAD BALANCE
Press the SEL button four times or twice (EQ Preset Mode) to enter the FAD mode
and the screen will display “FAD”.
There are no rear speakers so this setting can stay at default or max out the front fade
by turning the volume knob clockwise.
ERROR & RECOVERY
1. In case of any error during the process of radio or disc playing “ERROR” will
appear on the screen, you will then have to restart the device.
2. If the sign of “ERROR” remains it is recommended that you press the RESET
button with a fine tipped tool through the small hole located in the lower left corner
of the stereo chassis.
CD/MP3: BASIC OPERATIONS
INSERT/EJECT: Press the button on the panel, the faceplate will open. Select a
disc and insert into the disc holder with the printed side facing up. Press EJECT to
take the disc out of the holder. If the disc is not removed from the holder within 10
seconds it will automatically go back inside the holder. When the disc is taken out of
the holder the stereo will automatically enter into radio (BAND) mode.
OPEN Button:
Press to open the front panel to access the CD.
PLAY/PAUSE
When a disc is in the disc holder press the PLAY button to play the disc. This function
will also work when in the RADIO mode. To pause press the play button, the display
will show “ ----“; press the play button again to resume play.
(1) NEXT SEARCH
In the PLAY mode press the button to skip to the next track on the CD/MP3, the
new track number will be displayed in the display. Press for the desired track
number.
(2) PREV SEARCH
In the PLAY mode press the button to skip to the previous track on the CD/MP3,
the previous track number will be displayed in the display. Press for the desired
track number.
(3) FAST FORWARD
In the PLAY mode press and hold the button to fast forward through the current
track, then release the button and press the button to stop and play the current
track.
(4) REWIND
In the PLAY mode press the button to reverse through the current track.
Release the button and press the button to stop and play the current track.
INT: Browse Programs
Press the INT button and the LCD will display the sign of “INT”, the player will play the
introduction (5 seconds) of each track on the disc. Press the INT button again to stop
browsing and enter into normal play mode.
10