Dimplex BF39ST/DX Fire Pit User Manual


  Open as PDF
of 34
 
1
BF33ST, BF33DX, BF39ST, BF39DX, BF45ST, BF45DX
OPERATION
MANUAL CONTROLS
(WITHOUT REMOTE OPTION)
The fireplace can be controlled by the manual
switches located on the fireplace (FIGURE 1).
Main Power Switch
Main ON/OFF switch, activates the flame effect.
Heater Control Switch
Heater ON/OFF switch, activates heater to the high
level.
MANUAL CONTROLS
(WITH REMOTE OPTION)
The fireplace can also be controlled in a similar
manner to the remote control with the manual
switches located on the fireplace (FIGURE 2).
(refer to initialization instructions on page 2)
Main Power Switch
Main ON/OFF switch supplies power to the circuit
board. When the Main ON/OFF switch is switched to
the ON position the Level 1 indicator light will flash.
On Switch
1. Pressing once on the remote control board “ON
SWITCH” activates the Level 1 function.
Level 1: The flame effect is turned on and the first
red indicator light is activated.
2. Pressing twice on the remote control board “ON
SWITCH” activates the Level 2 function.
Level 2: The flame effect remains on, the heater
is activated to the low heat setting, and
the first and second red indicator lights are
activated.
3. Pressing three times on the remote control board
“ON SWITCH” activates the Level 3 function.
Level 3: The flame effect remains on, the heater
is set to the high heat setting, and all three red
indicator lights are activated.
Off Switch
Pressing this button ONCE will turn the unit OFF.
OFF
SWITCH
ON
SWITCH
LEVEL 1
INDICATOR
LEVEL 2
INDICATOR
LEVEL 3
INDICATOR
FIGURE 2
HEATER CONTROL
SWITCH
FIGURE 1
MAIN POWER
SWITCH
MAIN POWER
SWITCH
 previous next