Desa (v)V42EP SERIES Outdoor Fireplace User Manual


 
www.desatech.com
108862-01E20
FIREPLACE INSTALLATION
Continued
Figure 38 - Installing Rear Brick Panel
Figure 39 - Installing Left Side and Top Brick Panels
Rear Brick Panel
Left Side
Brick Panel
Top Brick Panel

GLOWING EMBERS
Each log is marked with a number. These numbers will help you
identify the log when installing. It is very important to install these
logs exactly as instructed. Do not modify logs. Only use logs sup-
plied with replace.
Open louvers, remove screen, unlock door latches, and open glass
door. See Removing/Replacing Glass Door, steps 1 and 2, page 19. In-
stall logs according to instructions for replace model numbers.
1. Place log #1 (base log) onto pin on left front side of grate as
shown in Figure 40.
2. Rest left side of log #2 (front log) onto top of log #1. Place
right side of log onto second pin located on right side of grate
(see Figure 41).
3. Place log #3 (rear log) onto pins on rear of grate as shown in
Figure 42.
4. Place log #4 (crossover log) onto pins from both logs #2 and
#3 as shown in Figure 43.
Figure 41 - Installing Log No. 2
5. Install rear brick panel rst. Rest bottom edge of panel on back
edge of grate (see Figure 38).
6. Install top brick panel by resting on the top of the rear panel.
Hold the top brick panel in place and install left side brick
panel by sliding it between the grate and the side of the rebox,
securing top panel (see Figure 39).
7. Install the right brick panel using the same method described
in step 6 for left brick panel.
8. Replace deector shield using screws removed in step 4.
9. Install logs, lava rock and glowing embers. See Installing Logs,
Lava Rock and Glowing Embers.
10. Close glass door and lock latches on top and bottom of door
and replace screen. See Removing/Replacing Glass Door, steps
5 and 6, page 19.
11. Close top and bottom louvers.
Figure 40 - Installing Log No. 1
1
1
2
Figure 42 - Installing Log
No. 3
3
Figure 43 - Installing Log No. 4
4