DCS BGB48 Gas Grill User Manual


 
22
Specified clearances main-
tained to combustibles.
Verified proper enclosure
ventilation.
All internal packaging and
any adhesive residue
removed. To remove stub-
born residue, use rubbing
alcohol or a commercially
available adhesive remov-
er.
Removed shipping brack-
ets.
Knobs turn freely, bezels
centered.
Each burner lights satis-
factorily, individually or
with adjacent burner lit.
Air shutters adjusted.
Low flame setting satis-
factory.
Drip pan in place properly
and sliding freely.
Heat Shields are located
properly and in place.
Pressure regulator con-
nected and set for 1 kPa
Natural, 2.75 kPa LPG gas.
Manual shut-off valve
installed and accessible.
Unit tested and free of
leaks.
User informed of gas
supply shut-off valve
location.
All radiants are assembled
and put in place.
Check match lighting.
PLEASE LEAVE THESE
INSTRUCTIONS WITH THE
USER.
USER, PLEASE RETAIN
THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
INSTALLATION
INSTALLER CHECKLIST