Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
16
IMPOR
TANT!
T
O ENSURE PROPER GAS FLOW
, BURNER
CONTROL VALVES MUST
BE “OFF” BEFORE
OPENING THE GAS CYLINDER VALVE
.
WARNING: During assembly
of the grill and when attaching or
replacing the L.P. gas cylinder,
insure that the gas supply hose is
free of kinks and/or damage and
is at least 3 inches away from hot
surfaces such as the grill casting.
Fig. 39
LP Cylinder Installation
Fig. 38
1.
Set the LP Cylinder in the Cylinder Support location with the
outlet valve facing toward the right side of the grill (Fig. 38 and 39).
2.
Insert the TYPE 1 Nipple of the regulator into the cylinder’s Fuel
Valve Outlet as shown. Turn the regulator hand wheel clockwise
to tighten. No tools are needed. The hand wheel will come to a
complete stop when the connection is secure, and the gas will
not flow until a positive seal is achieved.
Grill Assembly — 8200 Series
NOTE: Your 8200 Series grill is set up from the factory to use LP GAS. If you want to use NATURAL
GAS, you must purchase the NATURAL GAS CONVERSION KIT (sold separately). Please skip
to the section titled “Natural Gas Installation”.