Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
C-2
Cisco CGS 2520 Hardware Installation Guide
OL-31444-01
Appendix C Configuring the Switch with the CLI Setup Program
Accessing the CLI Through the Console Port
Figure C-1 Connecting the Console Cable
Step 3
Configure the baud rate and character format of the PC or terminal to match the console port
characteristics:
• 9600 baud
• 8 data bits
• 1 stop bit
• No parity
• None (flow control)
Step 4 Connect power to the switch as described in the “Power Supply Module Installation” section on
page 3-2.
Step 5 The PC or terminal displays the bootloader sequence. Press Enter to display the setup prompt. Follow
the steps in the “Completing the Setup Program” section on page C-7.
1 RJ-45 console port 2 Console cable (RJ-45-to-DB-9 adapter cable)
207536
2
1
1