Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
24
12
13
Lower Hinges
Attach lower hinges to back of firebox using two 1/4’’-20x1/2’’ machine screws,7x15 fiber washers and 1/4’’-20 flange
nuts per hinge. The center flat portion of the hinge should be at the bottom (see inset below).
□
Lid Handle and Upper Hinges
Attach handle and two insulation washers to front of lid. Inside lid, secure with two 5x15 fiber washers and #10-24 wing
nut (A).
Attach upper hinges to back of lid using 1/4’’-20x1/2’’ machine screws, 7x15 fiber washers and 1/4’’-20 flange nuts per
hinge. Hinges should curve downward when properly installed (B).
□
□
Center flat portion
of hinge on bottom
Lower Hinge
1/4’’-20x1/2’’
Machine Screw
Qty.4
1/4’’-20
Flange Nut
Qty.4
7x15
Fiber Washer
Qty.4
1/4’’-20x1/2’’
Machine Screw
1/4’’-20
Flange Nut
7x15
Fiber Washer
5x15
Fiber Washer
Qty.2
7x15
Fiber Washer
Qty.4
1/4’’-20x1/2’’
Machine Screw
Qty.4
Insulation Washer
Qty.2
1/4’’-20
Flange Nut
Qty.4
#10-24
Wing Nut
Qty.2
Handle
Insulation Washer
5x15
Fiber Washer
#10-24
Wing Nut
Upper Hinge
1/4’’-20x1/2’’
Machine Screw
1/4’’-20 Flange Nut
7x15 Fiber Washer
A
B