Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
ASSEMBLY
6
ASSEMBLY GUIDE
Part Qty.
B1– Lower Body 1
B2– Wind Shield 1
B3– Grill Lid 1
GRILL BODY Assembly
Step 1 - Attach the Lower Body (B1) to the Cart Assembly
by aligning the studs on the bottom of the grill with the
corresponding holes in the tops of the leg assemblies. Secure
with 7 each 10-24 nuts. A Nut Driver (not supplied) will work
nicely for this step.
B1
B1
10-24
Nuts
(3 each)
10-24x3/8"
Screws
(3 each)
Fiber
Washer
(3 each)
Step 3 - Attach the Wind Shield (B2) to the Lower Body
(B1) by aligning the holes in the panels with the corresponding
holes in the Lower Body. Secure with 3 10-24 nuts, 3 10-
24x3/8" Screws, and fiber washers. The Wind Shield will
rest inside the Lower Body.
B2
B1
Step 4 - Attach the Grill Lid (B3) by aligning the hinge
holes in the lid to the matching holes in the Wind Shield
(B2). Insert 2 Hinge Screws into the holes and secure with 2
1/4-20 nuts and two Fiber washers from the inside of the
grill.
Hinge
Screws
(2 each)
1/4-20
Nuts
(2 each)
B3
Fiber
Washer
(2 each)
1/4-20x3/4"
Cart
Bracket
.
Studs
located on
Lower
Body.
Visit www.sizzleonthegrill.com/user-forums to chat with Patio Bistro® owners just like you!
(qty 5)
Fiber Washer
(qty 10)
10-24x3/8"
(qty 3)
screw
10-24 Nut
(qty 2)
Hinge
(qty 2)
1/4-20 Nut
screw
1/4-20x3/4"
Step 2 - With the legs assembled to the Lower
Body, tighten the 4 screws holding the Cart
Bracket in place. Once complete, turn the grill over
to the upright position.