Char-Broil 11601579 Charcoal Grill User Manual


 
Ignition Module
Bracket
5
ASSEMBLY GUIDE
Part Qty
GRILL CART Assembly
A8
Cart Bracket
1
Step 3 - Carefully turn the Cart Assembly over
and allow it to rest on the tops of the leg
assemblies. Assemble the Cart Bracket (A8) to
the Cart Assembly by by inserting 4 each 1/4-
20x2" screws int0 into corresponding holes as
shown. Allow the Cart Bracket to rest on the
floor, this will help with alignment. Secure with 4
each, 1/4-20 nuts using a small adjustable
wrench, not supplied. FINGER TIGHTEN ONLY
AT THIS TIME. The bracket will be tightened in
step B2.
Be sure to install Cart Bracket (A8) on the side
opposite of the ignition module bracket. Once
complete -leave the cart in the upside down
position.
Lastly, insert the Leg End Caps (A9) into the front
legs and secure with 1 each #10x3/8" screw.
A9
#10x3/8" screws
A8
1/4-20x2"
screws
Place the Lower Body on the carton
pad upside down in preparation for
the next step.
A9
Leg End Cap
2
Visit www.sizzleonthegrill.com/user-forums to chat with Patio Bistro® owners just like you!
.
1/4x20-2"
1/4-20 Nut
(qty 4)
screw
1/4-20 Nut
(qty 4)
#10x3/8"
(qty 2)
screw