Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
HINT: For the first portion of the
assembly you will be assembling
the grill bottom, pillar and base up-
side-down.
1. Position the grill bottom casting
upside down so that the heat collar
assembly is upward.
2. Working from the back (open) side
of the pillar, set the pillar upside
down onto the collar assembly.
3. Locate the holes in the pillar bot-
tom and align with holes in collar.
4. IMPORTANT:
Make sure the gas control valve
ends are inside the burner ven-
turi tubes extending through the
grill bottom as shown. (See
Adjacent Page)
5. Thread screws into holes and tight-
en with a wrench / screwdriver.
12
Assembly Instructions • Attach the Pillar to Grill Bottom.
pillar
( 1 )
shown
right-
side up
front
control
knobs
1/4-20 x 3/4”
( 4 )
Use hardware bag “B”:
Locate these parts:
grill bottom
( 1 )
shown right-
side up
back hinge
strut
tools needed:
3
⁄8" open-end wrench
flat-blade screwdriver
collar
assembly
top
top