Vermont Casting 3605G Smoker User Manual


 
Tools needed:
Phillips Head
Screwdriver
Assembly Step 9
Locate these parts:
1. Slide the handle washer onto the end
of the door handle, followed by the
handle spring as shown.
2. Feed the door handle into the hole
through the front of the door panel.
3. From the back side of the door panel,
insert the mounting bracket over the end
of the handle as shown.
4. With lock washers placed on the bolts,
insert the bolts through the mounting plate,
into the pre-threaded mounts and firmly
tighten the bolts.
14
Door Handle Kit
1/4-20 x 3/8” Bolts
and 1/4-20 Lock
Washers (2 ea)
Mounting
Bracket
HARDWARE BAG
E
Handle Spring
Handle Washer
1
3
2
4