Vermont Casting 3605G Smoker User Manual


 
Hardware:
Tools needed:
Assembly Step 6
Phillips Head
Screwdriver
7/16”
Wrench
1. Line up the carry handle with the corresponding
holes on the side of the cabinet as shown. The
handles must be positioned upright with the
bolt holes on the bottom as shown.
2. Insert the bolts from the outside and thread the
lock washers and nuts from the inside of the
cabinet.
3. Firmly tighten the nuts.
4. Complete steps for both sides of the
cabinet assembly.
11
1/4-20 Nuts
8 Required
1/4-20 x 5/8” Bolts
8 Required
Locate these parts:
2 Carry
Handles
1/4 Lock Washers
8 Required
HARDWARE BAG
D