Broilmaster U26SS Gas Grill User Manual


 
PATIO BASE POST ASSEMBLY
13
Attach the bracket and slide assembly to the
factory installed screw located in the bottom of the
grill housing. Figure 6.
Loosen the wing nut and move the slide up or
down to accept the grease cup. Be sure to trap the
rim of the cup as shown.
Use only noncombustible containers for the
grease cup (aluminum or tin cans) do not use
combustible containers such as Styrofoam or
paper cups.
7
Continue assembly as directed by the Owners
Manual packaged with the grill head.
9
FIGURE 7
Attach the control housing (10) using two #8 x 1/2
screws (11) or two plastic panel fasteners as
shown in Figure 7.
8
11
11
10
10
FIGURE 6