Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
B101586-7-1012Page 14
NOTICE: Assemble post before assembling grill.
The SS26P and BL26P Patio Bases are only for use with Broilmaster
Gas Grills. Before proceeding with installation read your Owner’s
Manual for the proper location and minimum clearances to com-
bustible materials for your grill and in-ground post.
Verify that all parts listed in the exploded view of this product have
been included before beginning this installation.
Recommended Tools:
• Drill/Driver
• Two adjustable wrenches or a socket set
• A medium Phillips screwdriver
• Pipe thread sealer or Teon tape (for gas connections)
• Soapy water solution (to test for leaks)
1. For Stainless Steal Posts attach lower bracket assembly
to post with eight Hex Head #10-1/2” Self Drill screws. For
Black Posts, secure lower bracket assembly to post with eight
10 x 1/2 Hex Head screws. See Figure 1. Use black screws for
black posts and stainless steel screws for stainless steel posts.
NOTE: The large rectangular cut out is located at the front of the
post near the top.
Figure 1
pAtio bASE inStAllAtion
2. Fasten the bottom of the post to the cast base using 1/4 x 1/2
Lock Washers, and 1/4-20 x 1 1/2 Hex Head bolts. See Figure 2.
Anchor the cast iron patio base to your patio using the two holes
provided in the base. (Hardware not included)
Note: Make sure that the large rectangular cut out is facing in
the direction that you want your grill to face.
Figure 2
3. Insert the stainless steel ex tube assembly into the post. The
inlet side of the gas tubing may protrude from the bottom of
the patio base or through the large circular hole in the back of
the square post. See Figure 3. Note: Do not attempt to cut or
alter the ex tube in any way.
Figure 3
4. Attach the grease cup bracket assembly to the bottom of the
grill casting and fasten with #10-24 x 3/4” bolt, 9/32 ID x 5/8
OD washer, and #10-24 wing nut. See Figure 6.
Use only the supplied grease cup or noncombustible contain-
ers for the grease cup (aluminum or tin cans). DO NOT use
combustible containers such as paper or Styrofoam cups.
Figure 4