Brinkmann Two Burner Gas Grill User Manual


  Open as PDF
of 8
 
3
Step 1
Snap down legs to form a "V" with the stove
base.
Step 2
Open lid and align the two wind guards by
inserting notched support arms into wind
guards.
Step 3
Remove regulator/valve assembly.
Step 4
Before attaching propane cylinder, make
sure the regulator and burner control knobs
are in the "OFF" position.
Step 5
Attach propane cylinder to regulator/valve
assembly by turning propane cylinder
counter-clockwise. HAND TIGHTEN ONLY.
NOTE: Use propane cylinder upright when
possible to prevent flare-ups.
Step 6
Attach regulator/valve assembly to stove
fitting. HAND TIGHTEN ONLY.
Notched Support Arm
Regulator/Valve Assembly
Regulator Knob
Burner Control Knobs
Stove Fitting
WARNING: Always snap down legs to form a "V" with the stove
base to prevent the stove from becoming unstable
while in use.
 previous next