Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
6
Step 10
Align shelf support brackets with holes
on inside of legs. Attach to legs with
M8 X 15 shouldered bolts.
NOTE: To lower shelf, lift off of top bolt
and lower. To raise, lift shelf up and lock
on top bolt.
Step 11
To attach all four air vent dampers to
insides of lid and body, place vent
dampers on the inside of the unit with the
adjustment tab sticking through one of
the air vent holes. Using M6 x 12 bolts
and M6 X 5 hex nuts, secure vent
dampers to the unit. Do not overtighten
the hex nuts as this will make the vents
difficult to open and close.
Step 12
Install heat indicator in lid by aligning
tabs on heat indicator with slots in the
opening on front of lid. Insert and rotate
clockwise until the word “BRINKMANN”
on heat indicator is at bottom of dial.
M6 x 12 bolt
M6 x 5 hex nut
Leg
Shelf Support
Brackets