Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
9
Step 3
Saturate charcoal with lighting fluid. With lid open wait 2 to 3 minutes
to allow lighting fluid to soak into charcoal. Store charcoal lighting
fluid safely away from the grill.
Step 4
Open the side air vents approximately half way. With grill lid open,
stand back and carefully light charcoal and allow to burn until covered
with a light ash (approximately 20 minutes).
WARNING: Charcoal lighting fluid must be allowed to completely burn off
prior to closing grill lid (approximately 20 minutes). Failure to
do this could trap fumes from charcoal lighting fluid in grill
and may result in a
flash-fire or explosion when lid is opened.
Step 5
With coals burning strong, close the lid. Allow the temperature to
reach 225° on the heat indicator. Maintain this temperature for 2
hours.
Step 6
Increase the temperature to 400° on the heat indicator . This can be
achieved by opening the side air vents and adding more charcoal
and/or wood (see “Adding Charcoal/Wood During Cooking” section of
this manual). Maintain this temperature for 1 hour then allow unit to
cool completely.
NOTE: It is important that the exterior of the grill is not scraped or
rubbed during the curing process.
IMPORTANT: To protect your smoker from excessive rust, the unit must
be cured periodically and covered at all times when not in
use. A smoker cover can be ordered directly from
Brinkmann by calling 1-800-468-5252.
YOUR BRINKMANN GRILL KING DELUXE IS NOW CURED
AND READY FOR USE.