Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
20
Step 9
Remove the four screws from the
bottom mounting brackets on the
burner and uncoil the electrode
wire. Insert the burner into the grill
by placing the venturi through the
large hole in the center of the
bottom housing. Align the venturi by
inserting the control valve orifice
into the venturi tubes. Secure the
burner to the bottom housing use
the four screws removed from the
burner mounting brackets.
NOTE: Manifold will have offset
holes and can only be
installed by aligning
holes in manifold with
holes in control panel.
Step 10
Insert the burner electrode wire
through the hole in the control panel
and attach to the end of the igniter.
Press the igniter into the hole on
the control panel until it snaps in
place.
view from top
view from bottom