Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
17
Choose a good, cleared
assembly area and get a friend
to help you put your grill together.
Lay cardboard down to protect
grill finish and assembly area.
Step 1
Stand lower grill housing on right
side, as shown. The wheels can
only be assembled to the left side of
the grill. Align the bolt holes in the
longer set of legs to the bolt holes in
the side of the lower grill housing.
The two welded brackets on the
bottom end of the legs should face
toward the grill and the side table
pivot studs should also face inward
towards the other leg. Insert two
6x50mm screws through each leg
and hand tighten.
Step 2
With the help of a friend, turn the
body over to the opposite end. Align
the bolt holes in the shorter set of
legs to the bolt holes in the side of
the lower grill housing. The two
welded brackets on the bottom end
of the legs should face toward the
grill and the side shelves pivot studs
should also face inward towards the
other leg. Insert two 6x50mm
screws through each leg and hand
tighten.
Note: Use caution when lifting the
lower grill housing to prevent
back injury or damage to the
grill. With the help of an
assistant, carefully turn the
smoker to install the other
legs. Try to minimize the
stress placed on the legs.
Step 3
Assemble tank support bracket
between two short legs using two
6x50mm bolts and nuts.