Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
23
Step 13
Slide baskets into slots located on
inside of doors.
Step 14
Attach right side panel between
straight legs using four #8 X 3/8"
sheet metal screws. Panel should be
mounted with louvers toward bottom
of panel. Then add four plastic inserts
into holes on straight legs.
Step 15
Remove button cap and retaining nut
from igniter. Feed threaded end of
igniter through hole on the control
panel from back side and secure with
retaining nut.
Step 16
To install battery unscrew igniter
button cap. Insert battery with positive
end towards button. Replace igniter
button cap.
Step 17
Attach control valve manifold to
control panel using screws and split
lock washers provided with manifold.
One screw hole is offset for proper
installation.
NOTE: Manifold will have offset
holes and can only be
installed by aligning holes
in manifold with holes in
control panel.
Louvers
Sheet Metal Screws
screw from inside of Panel
Control Valve Manifold
Four - Plastic inserts
Hose/Regulator
Retaining nut
Insert this end
into hole
Igniter