Brinkmann 810-8532-S Gas Grill User Manual


 
7
810-8905-S & 810-8907-S
SIDE BURNERS
CAUTION: Only use specified
natural gas orifice for your grill.
Step 8
Remove the side burner brass cap by
using the small wrench to unscrew
the two small screws.
Step 9
Remove access panel on left side of
grill for better view of gas orifice.
Step 10
Use the gas orifice tool to remove
LP brass orifice from the hole on
the top of side burner.
Step 11
Using gas orifice tool, install
1.25mm (GREEN) natural gas
orifice. Be careful not to cross
thread natural gas orifice.
Step 12
Replace the side burner brass cap
to the burner.
Small Wrench
Gas Orifice Tool
Access Panel
Brass Cap
1.25mm
Existing Side Burner LP
Gas Orifice
Replacement Side Burner
Natural Gas Orifice
(identified by number)
Side Burner 1.25mm (GREEN)