Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
WHEN TO PERFORM A LEAK TEST:
• After assembling or converting your natural gas grill and before lighting for the first time, even if
purchased fully assembled.
• Any time the gas components are replaced.
• Any time your grill has been moved.
• At least once per year or if your grill has not been used for more than 60 days.
CHECKING FOR LEAKS:
1. Create a mixture of 50% water and 50% liquid dishwashing soap.
2. Open the lid.
3. Ensure all control knobs are set to the "OFF" position.
4. Ensure gas hose is tightly connected to gas source.
5. Turn on the fuel supply on at the source.
6. Apply the soap water mixture to the following:
Hose connection to gas manifold.
The full length of gas supply hose.
Rotisserie orifice connection.
Rotisserie supply line connection to rotisserie valve assembly.
NOTE: Rotisserie gas supply line can be gas leak tested by removing the grease tray
and applying soap water mixture from under the control panel.
Quick disconnect coupler.
E
D
C
B
A
17
WARNING
Watch For Bubbles
Before first use, check gas supply line connection to rotisserie burner
valve (under control panel) and gas supply line connection to the
orifice (back of grill body).
CAUTION!
E
D
C
A
B