Brinkmann 2210 Series Gas Grill User Manual


 
28
Step 13
Attach the hose heat shield to the
right side of the cart frame using
two #8 self-tapping screws.
Step 14
Remove two bolts and washers
from the side burner valve. Insert
the side burner valve assembly
through the hole in the side burner
table base, then firmly seat the
valve nozzle into the burner venturi.
Hold in place while you perform
Step 15.
Warning: Never use your grill
without leak testing all
gas connections and
hoses. See the section
on “Leak Testing” in this
manual for proper
procedures. (See Page 7)
Step 15
Attach the side burner valve with
two M4 bolts with spring washers
which come with valve. Then install
the side burner control knob onto
valve stem.
Side
Burner
Valve
Burner Venturi
Valve
Nozzle
Side
Burner
Control
Knob
Hose
Heat Shield