Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Step 7
Reinstall the 3 interior shelves as follows:
1. Carefully slide in the shelf with notch at the bottom position (the notch will rest on the bracket tab).
(Make sure that the shelf flanges are ALL seated into the mounting tabs.)
2. Slide in remaining 2 shelves into position as the bottom shelf.
notch
tab
Step 6
bottom flange-
timer/bracket
E-Unit
cord
Install timer/bracket assembly onto bottom, rear of cart with 2 screws (into bottom flange of timet bracket).
Make sure timer face is aligned with rear panel cutouts. Tighten screws. Feed the power cord from the timer
out the grommeted hole shown. Unwind enough E-Unit power cord from the cord brackets on the rear panel to
feed back through each grommeted hole and into the timer. Plug one E-Unit power cord into the bottom outlet
of the timer marked 'A' only and the other E-Unit power cord into the bottom outlet of the timer marked 'B' only.
DO NOT PLUG BOTH E-UNIT POWER CORDS INTO ONE SIDE MARKED 'A' OR 'B' OUTLETS. THIS
WILL CAUSE AN OVER LOAD DURING THE CHARGING PROCESS.
timer cord