Black & Decker JC400 Charcoal Grill User Manual


 
4
ENGLISH
Do not allow children or any person
unfamiliar with these instructions to use the
appliance.
Do not allow children or animals to come
near the work area or to touch the appliance
or power supply cord.
Close supervision is necessary when the
appliance is used near children.
After use
Switch off and remove the plug from the
socket before leaving the appliance
unattended and before changing, cleaning or
inspecting any parts of the appliance.
When not in use, the appliance should be
stored in a dry place. Children should not
have access to stored appliances.
Inspection and repairs
Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches and
any other conditions that may affect its
operation.
Do not use the appliance if any part is
damaged or defective.
Have any damaged or defective parts
repaired or replaced by an authorised repair
agent.
Before use, check the power supply cord for
signs of damage, ageing and wear.
Do not use the appliance if the power supply
cord or mains plug is damaged or defective.
If the power supply cord or mains plug is
damaged or defective it must be repaired by
an authorised repair agent in order to avoid a
hazard. Do not cut the power supply cord
and do not attempt to repair it yourself.
Never attempt to remove or replace any parts
other than those specified in this manual.
Do not attempt to repair the appliance. Take
it to your nearest Black & Decker-owned or
authorised Service Centre for repair.
Electrical safety
This product must be earthed. Always
check that the power supply corresponds
to the voltage on the rating plate.
Power plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (Class 1)
appliances. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
Extension cables & Class 1
product
A 3-core cable must be used as your
appliance is earthed and of Class 1
construction.
Up to 30m (100ft) can be used without loss of
power.
To avoid the risk of electric shock, do not
immerse the cord, plug or appliance in
water or other liquid.
If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorized Black & Decker Service Center in
order to avoid a hazard.