Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Assembly Instructions
NOTE: Refer to Assembly Diagram on pages 21 and 22. It may be easier to position grill on its
back side for assembly. Do not tighten bolts and nuts completely until told to do so.
Bolts are shown actual size.
Tools Required:
Bolt,
M6x15
Item#23
Nut
M6
Item#25
B)•Secure right side of Cart Bottom Panel(33) to
Right Side Panel(35) using three M6X15 screws
and nuts.
D)•Secure Rear Panel(26) to rear of Top
Panel(36) and to rear of Bottom Panel(33)
using six M6X15 screws and nuts.
Step 1 - CONSTRUCT CART CABINET
*Cabinet Panels are labeled for your convenience.*
33
24
36
35
Axle
Holes
Threaded
Caster
Holes
35
A)•Secure left end of Cart Bottom Panel(33) to Left
Side Panel(24) using three M6X15 screws
and nuts.
C)•Secure left side of Top Panel(36) to Left Side
Panel(24) using two M6X15 screws and nuts.
Secure right side of Top Panel(36) to Right
Side Panel(35) using two M6X15 screws and nuts.
STEP 3 - INSTALL WHEELS/ CASTERS
•Insert Axle(19) through axle holes in Left Side Panel. Install the
Wheels by placing them on the axle and pushing into position until a
click is heard or until they will not pull off.
•Install Caster(34) by threading the caster into the end of the Right
Side Panel and hand tighten until it stops.
19
Bolt,
M6x15
Item#23
•Insert Door Center Post(31) between Top Panel(36) and Bottom
Panel(33) using four M6X15 screws and nuts.
Nut
M6
Item#25
36
33
STEP 2 - INSERT DOOR CENTER POST & DOOR MAGNET
•Install one Magnet Assembly(32) onto each Bottom Panel and Top
Panel using two M6X15 screws and nuts for each Magnet
Assembly.
5
34