Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
20
6. Check for leaks by brushing the soap solution on all gas valves, hose connections and fittings. (Shown by the heavy
arrows in Fig. 3a, 4, 5 and 6a) Make sure you generously brush the locations with the soap solution, completely
surrounding the connections and fittings.
NOTE: After checking the connections and fittings in
Figure 4, replace the control panel in the same
manner as it was removed. Take special care to be
sure the valve ends are inserted into the openings
in the burner ends as shown in Figure 4a. Be sure
not to over bend or kink the corrugated rotisserie
gas line. If all valve ends do not immediately align
with the burner end openings, starting at one end,
grasp the tube burner inside the firebox and gently
move it until the valve seats in the open end. Also
note that the end caps of the control panel skin
fit to the outside of the flanges on the firebox as
shown in Figure 4a.
Fig. 4a
Fig. 4
corrugated
rotisserie
gas line
Fig. 5
Back view of grill
Note: Shown without hood for clarity
7. On back of grill firebox, remove Rotisserie Burner Back Cover by removing two nuts and bolts holding it in place
(Figure 6). After testing connections, replace Rotisserie Burner Back Cover
Rotisserie Burner Cover
Nut
Bolts
Nut
Fig. 6
Fig. 6a